KitchenAid KHPF 7520/I Instrucciones de uso Pagina 11
- Pagina / 16
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Important: The following procedure shall
be carried out by competent technical
personnel only. The hob can be installed
on different types of materials, such as
masonry, metal, bare wood and heat
resistant laminate coated wood (90°C).
Cut an opening into the worktop to the
dimensions shown in the diagram. In order to
correctly fit this type of hob, a 3mm deep
recess around the edge of the opening is also
needed.
Note: In case of laminated worktops with a laminate thickness lower
than 3 mm, create a recess as shown as on the detailed schematic
drawing.
Before positioning the hob, apply the adhesive seal supplied on the
bottom perimeter of the hob itself, where this will be in contact with
the worktop (fig. 2).
Once the seal is in position, place the hob in the recess. Fix the hob
to the worktop using the screws and brackets provided, tightening
them carefully until the hob is perfectly flush. (fig. 3).
Carefully trim the excess seal. In case of installation on wood
(particularly chipboard), any small spaces between the edge of the
recess and the outside edge of the hob should be filled with small
quantities of silicon sealant (see fig. 4). Once the appliance has been
installed, the bottom part of the hob should be completely accessible.
Important:
• tighten the fixing brackets of the hob to the work top by hand,
using minimum force.
• In case of wooden (or similar) worktops, before fitting the
adhesive seal protect the surface of the milled recess with a
primer.
Slots for extra brackets have been created on the bottom of the
appliance, to help achieve a more flush positioning (should this be
necessary). Appropriate brackets can be obtained from the Customer
Care Centre.
Fixing the Hob to the worktop. Flush fitted model.
11
R.10
Fig. 1
Fig. 2
Fig. 3
Fig. 4
- Instructions for use 1
- Using the burners 4
- Injector table 6
- Warnings and suggestions 7
- Safeguarding the environment 8
- EC Declaration of conformity 8
- Gas connection 9
- Electrical connection 10
- Replacing the injectors 12
- Fitting the wok burner 13
- Troubleshooting guide 15
- After Sales Service 15
- 5019 719 01132/C 16
Relacionado con productos y manuales para Placas KitchenAid KHPF 7520/I
Placas KitchenAid KHPS 7550 Instrucciones de uso
(16 paginas)
(16 paginas)
Placas KitchenAid KHIS 6520/I Instrucciones de uso
(24 paginas)
(24 paginas)
Placas KitchenAid KHIVF 90000 Instrucciones de uso
(132 paginas)
(132 paginas)
Placas KitchenAid KHDS 1160/I Instrucciones de uso
(16 paginas)
(16 paginas)
Placas KitchenAid KHMD4 60510 Instrucciones de uso
(16 paginas)
(16 paginas)
Placas KitchenAid KHIAS 10900 Instrucciones de uso
(16 paginas)
(16 paginas)
Placas KitchenAid KHYD2 38510 Instrucciones de uso
(20 paginas)
(20 paginas)
Placas KitchenAid KEWPP 90010 Instrucciones de uso
(16 paginas)
(16 paginas)
Placas KitchenAid KHPS 9050 Instrucciones de uso
(16 paginas)
(16 paginas)
Placas KitchenAid KHMD4 60510 Instrucciones de uso
(16 paginas)
(16 paginas)
Placas KitchenAid KHDD2 38510 Instrucciones de uso
(16 paginas)
(16 paginas)
Placas KitchenAid KHDP1 38510 Instrucciones de uso
(16 paginas)
(16 paginas)
Placas KitchenAid KCGT 6010/I Instrucciones de uso
(16 paginas)
(16 paginas)
Placas KitchenAid KHIAS 87700 Instrucciones de uso
(16 paginas)
(16 paginas)
Placas KitchenAid KHIMF 86500 Guía de usuario
(16 paginas)
(16 paginas)
Placas KitchenAid KHDS 1160/I Instrucciones de uso
(16 paginas)
(16 paginas)
Placas KitchenAid KHPS 7550 Instrucciones de uso
(16 paginas)
(16 paginas)
Placas KitchenAid KHIMS 36500 Guía de usuario
(12 paginas)
(12 paginas)
Placas KitchenAid KEWTP 90010 Instrucciones de uso
(16 paginas)
(16 paginas)
Black Box 26558 Handbücher
Bedienungsanleitungen und Benutzerhandbücher für Computerzubehör Black Box 26558.
Wir stellen 1 PDF-Handbücher Black Box 26558 zum kostenlosen herunterladen nach Dokumenttypen zur Verfügung Bedienungsanleitung
Comentarios a estos manuales